Expert tile installation for every surface in your bathroom, set right the first time.
Bathroom floor tile in Conroe starts at $8 per square foot installed, and shower wall tile at $12 per square foot, because walls need waterproof backer and membrane. A standard floor takes 2-3 days; a full shower tile job takes 4-6 days.
Tile is the foundation of a bathroom that looks great and holds up over time. Done correctly, a tile floor lasts decades, a tiled shower stays watertight, and the right wall tile makes the entire bathroom feel intentional and well-designed. Done incorrectly, with a cheap setting bed, no waterproof membrane, poor grout joint consistency or tile that isn't right for the environment, you're looking at cracked tiles, growing grout stains and eventually water damage behind the walls.
At Bath and Shower Remodelers, bathroom tile installation is core to almost everything we do. Whether you need just the floor retiled, a full shower surround replacement, or tile work as part of a complete renovation, we approach every tile project the same way: proper substrate prep, correct waterproofing in wet areas, precise layout planning, and careful installation that holds up under daily use in Conroe's humid climate.
We work with tile in every part of the bathroom: shower floors and walls, bathroom floors, tub surrounds, accent walls and backsplashes. We source materials ourselves or work with tile you've already selected. We don't do cosmetic patches over failing substrates. If the foundation isn't right, we fix the foundation before the tile goes down.
Choosing the right tile for a bathroom in Conroe means accounting for moisture, traffic, cleaning requirements, and aesthetics. Here's a breakdown of the tile types we install:
The classic choice for bathroom walls and lower-traffic floors. Ceramic is affordable, available in hundreds of colors and patterns, and easy to cut and set. It has slightly higher water absorption than porcelain, so it's best used for bathroom walls, backsplashes, and tub surrounds rather than shower floors where constant water contact is a factor. Excellent value for budget-conscious projects.
Our most-recommended tile for Conroe bathrooms. Fired at higher temperatures than ceramic, porcelain has a water absorption rate below 0.5%, making it nearly impervious to the humidity and moisture of a South Texas bathroom. It's harder, more durable, and available in every size from 4"×4" mosaics to 48"×48" large-format slabs. Excellent for shower floors, bathroom floors, and wet walls.
Travertine, slate, marble, limestone, and granite offer a timeless, high-end look that no manufactured tile can exactly replicate. Natural stone requires proper sealing on installation and periodic resealing over time, and some stones (marble in particular) are sensitive to acidic cleaners. When selected and maintained correctly, natural stone bathroom tile is one of the most beautiful and durable finishes available.
Tiles 24"×24" and larger create a very clean look with fewer grout lines, making bathrooms appear more spacious and easier to maintain. They require a flatter substrate than standard tile (we level the subfloor as needed before setting) and correct back-buttering technique to achieve full mortar coverage. Large-format porcelain is one of the most popular choices right now for Conroe master bathroom renovations.
Small-format tiles on mesh backing (typically 1"×1", 2"×2", or penny rounds) are ideal for shower floors, since the small tiles conform easily to the drain slope, and for decorative accent bands in showers and on walls. Mosaic installations have more grout lines and require grout sealing, but they create visual texture and detail that larger tiles can't achieve.
Modern porcelain manufacturing produces remarkably convincing wood-look plank tile: all the visual warmth of hardwood with none of the moisture sensitivity. These are popular for bathroom floors in Conroe homes where a cohesive wood-floor look is desired throughout the house. We also work with specialty formats including hexagon, arabesque, subway (classic and oversized), and 3D textured tiles for accent applications.
| Tile | Best for | Water resistance | Upkeep | Material cost |
|---|---|---|---|---|
| Ceramic | Walls, backsplashes, tub surrounds | Good; slightly more absorbent than porcelain | Low | $1-$4 / sq ft |
| Porcelain | Shower floors, bathroom floors, wet walls | Excellent; absorbs under 0.5% of water | Low | $3-$8 / sq ft |
| Natural stone | High-end floors and feature walls | Good once sealed | Seal at install and reseal over time; marble dislikes acidic cleaners | $8-$25+ / sq ft |
| Large-format (24" and up) | Master baths and a more spacious look | Excellent in porcelain | Easiest to clean: the fewest grout lines | More per sq ft than standard sizes |
| Mosaic | Shower floors and accent bands | Depends on the material | More grout lines to seal | Varies by material |
Material prices only, from our Conroe cost guide. Installed floor tile starts at $8 per sq ft and shower wall tile at $12 per sq ft.
Every surface in a bathroom serves a different function, and each requires a slightly different tile selection and installation approach:
Shower tile work is the most technically demanding tile installation in a bathroom. Walls must be backed with cement board or waterproof panels, and a liquid-applied or sheet waterproof membrane must be applied before any tile goes down. The shower floor requires precise slope work: the mortar bed must drain toward the center at the correct pitch so water runs into the drain rather than pooling. Grout joints in showers are sealed, and caulk (not grout) is used at all changes of plane (corners, wall-to-floor transitions) to allow for the minor structural movement that every building experiences. We don't cut corners on shower tile preparation.
Bathroom floor tile installation starts with a flat, solid substrate. We check and level the subfloor before setting to eliminate lippage (misaligned tile edges) and cracking over time. For floors in Conroe's older homes, some built on pier-and-beam foundations that allow more movement, we use the appropriate uncoupling membrane systems to protect against cracking. Grout selection, joint width, and sealing are all specified for the specific tile and traffic level of your bathroom.
A tub surround, the tiled wall area above and around the bathtub, is a wet area that must be properly waterproofed behind the tile, even though it doesn't see the same constant water exposure as a shower. We install cement board backer and a waterproof membrane before tiling, ensuring the surround will last the life of the tub without hidden moisture damage. Tub surrounds are also where we often add decorative tile accents, border trim, and niche shelves.
A tiled accent wall behind the vanity or a backsplash behind the sink adds visual interest and protects the wall from water splash and humidity. These installations don't require the same waterproofing depth as shower or tub work, but they still need proper backer, correct mastic or thinset adhesive for the tile type, and careful layout to center the design on the wall. Subway tile, mosaic sheets, and decorative designer tile are all popular choices for accent applications in Conroe bathrooms.
Tile installation pricing in Conroe depends on the tile type, the surface being tiled, the complexity of the layout, and the substrate preparation required:
Starting from $8 per sq ft installed
Standard ceramic or porcelain tile in a straight or offset (brick) pattern. Includes substrate prep (assuming subfloor is in good condition), thinset, tile, grout and sealing. Large-format tile, natural stone or complex patterns (herringbone, diagonal, custom inlay) add to the per-square-foot cost, typically $12-$22+ installed depending on material and layout.
Starting from $12 per sq ft installed
Shower tile starts higher because of the additional preparation required: cement board backer, waterproof membrane, and mortar bed for the shower floor slope. The starting rate applies to standard porcelain or ceramic tile in a subway or straight-stack pattern. Stone, large-format, or mosaic shower tile starts from $16-$25+ per square foot installed.
Subfloor condition, existing tile removal, layout complexity and the specific tile you select all affect the final number. We evaluate all of this during a free on-site assessment before quoting.
For a complete view of what bathroom projects cost in Conroe, see our bathroom remodel cost guide.
Get a free, no-obligation estimate from our Conroe bathroom remodeling team. We visit your home, assess the space, and give you a detailed written quote, all at no cost to you.
We’ll follow up within 24 hours to schedule your free visit.
